About Us
Universe Express Inc is aquality driven, full service Interstate and Local, Moving, Shipping and Storage Company.
We perform every type of relocation service and stand committed to quality, integrity and goodwill. Universe Express is unique in the industry, in that over 75% of our business comes from satisfied customer referrals.
We understand that our business thrives by making your move a positive and stress free experience. Our goal at Universe Express is to exceed your expectations.
We are fully insured, bonded and licensed by the ICC and DOT. Universe Express provides moving and shipping services anywhere in the United States, for residential and commercial customers.

Moving a hot tub or spa between American states

Moving a hot tub or spa across state lines is not like loading a sofa onto a furniture truck. Even a compact backyard spa can weigh several hundred kilograms, while a swim spa may exceed a tonne empty. The shell, cabinet, plumbing, heating system and electrical supply also have different handling limits: some units may be tipped, while others must remain upright. A safe interstate relocation starts with identifying the model, its removable parts and the correct transport position before loading time is booked.

For Australians, the destination is as important as the origin. A spa moved wholly inside Australia is handled under local state road rules and Australian electrical standards; one taken to the United States must satisfy the receiving state and local authority. This guide focuses on a U.S. interstate move while using metric measurements and Australian household realities as a reference. If the route begins or ends outside America, confirm that the broker is authorised to operate on that international lane before paying a deposit.

A spa changes the risk of the whole move

The biggest hazard is treating the spa as ordinary cargo. Its weight changes floor loading, ramp limits, lifting points and the number of people needed at each end. Acrylic shells can flex and crack if supported at the wrong point, while plumbing fittings and cabinet panels can shear. A trained spa mover uses an appropriate dolly, lifting straps and padding, and knows whether the shell can travel on edge. For a long-distance move, this specialist handling should be stated in the quote rather than assumed.

Australian backyards often make access a separate challenge, particularly around the narrow side gates, eaves and water tanks found on Sydney and Melbourne properties. Even a spa that clears a standard loading opening may still be blocked by a tight corner, a low pergola or a locked courtyard gate. Bring metric measurements to the site survey, including the narrowest opening and the turning space beyond it. The mover can then choose between a conventional truck, a smaller vehicle with a tail lift or a crane lift with the crane operator included.

Identify the spa before anything is booked

Read the manufacturer’s manual and locate the model and serial number before requesting a price. Some one-piece fiberglass shells may require an upright position, whereas cabinet-style acrylic models may have removable skirts, steps, railings, cover supports and access panels. Ask whether the plumbing is hard-wired, whether the cover is fitted and whether the unit has a skirting or spillway. A specialist move starts with that evidence, not a generic area or weight estimate.

Create a photo record showing the whole spa, the service cabinet, the motor and heating areas, every connection and the existing access route. Record its length, width and height, plus the empty weight or model specifications. Convert U.S. dimensions and gallons into metres and litres before comparing an American quote with an Australian supplier’s advice. Every 1,000 litres of water weighs about one tonne, so even a small error in the drain-down estimate can add a surprising amount of weight. Guidance on checking a broker’s knowledge of a particular lane or region appears in this route specialist advice.

Drain, isolate and protect the wet system

Water should leave the spa before the transport crew arrives. Switch off the supply at the isolator, drain through the filtration system or fill spigot as the manual directs, remove plugs and residual water from the jets, and run the circulation pump briefly if the manufacturer permits. A plumber may be needed for rigid pipework. Route the discharge through a hose to an approved drain point, protect the site from chemicals and leave the shell as dry as practical without forcing parts that could be damaged.

Electrical work is a separate trade and must match the destination. Australian homes generally use 230 volts with residual current protection, while U.S. spas commonly use 120/240-volt supply and GFCI protection under local electrical codes. A U.S. unit should never be connected to an Australian outlet or left with exposed wiring. Use a licensed electrician for disconnection and reconnection, obtain any required disconnect or installation permit, and follow the maker’s grounding, bonding and fill-before-heat instructions.

Plan access at both properties

Survey the pickup site and destination as two separate worksites. At each address, measure the gate, doorway, path, slopes, overhead clearance and final resting space; note whether a crane pad is needed and who can provide it. Remove patio furniture, pets and plants in advance. Crews should know about irrigation lines, soft pavers and tight corners, because an ordinary spa dolly can crush landscaping or damage a rendered wall. Protective walkway mats can prevent scratches during repeated trips.

Route planning should account for the state border, road restrictions and weather rather than relying on a straight line. The hauling carrier may need an oversize permit or pilot vehicle, especially if the load remains wide or extends beyond legal limits. Mountain grades, high winds, snow and heat all affect loading and timing. Border inspections are generally not a substitute for commercial freight documentation, so the carrier should confirm which state permits, insurance records and delivery paperwork apply along the route.

Build comparable quotes for the full job

Request an itemised quote in writing. It should separate the spa survey, disconnection, draining, cabinet removal, loading, transport, unloading, stairs or craneage, reassembly, electrical work and any storage. Check whether the price assumes a curb-side pickup, a residential lift or a first-floor delivery, since one hidden assumption can erase the apparent saving. Australian removalist quotes often separate GST, crane hire and travel time, while U.S. interstate quotes may bundle fuel and tolls differently. Compare the written scope rather than the headline price.

Know who is transporting the load. Universal Moving acts as a broker that connects customers with professional interstate movers, so the agreement should identify the contracted hauling carrier, its operating authority and any cargo coverage that applies to the spa. Confirm exclusions for electrical or water damage, deductibles and claims deadlines. Australian Consumer Law protections apply to goods and services supplied in Australia, but they do not automatically govern a U.S. interstate contract. When the spa forms part of a larger household move, a family relocation guide shows how one broker can coordinate the specialist item with the rest of the shipment.

Secure the load for a multi-day journey

Before departure, label and inventory every part. Bag screws, bolts and keys by component, seal plumbing openings as directed, protect cabinet panels with foam, and wrap the shell without hiding a crack or loose fitting. Use the transport orientation approved for the model, place straps where the manufacturer permits, and keep the load clear of sharp edges. The carrier should take close-up and wide photographs of the secured spa, its restraints and the loading position.

Long-distance transport makes small failures more expensive. Ask whether the truck has tracking, how often the driver will report and where the spa will be stored if a delivery date slips. Heat and vibration can loosen fittings or damage seals, so the manufacturer’s preparation instructions matter. Check the carrier’s inspection points at rest breaks and after any incident, and keep copies of the condition report, delivery receipt and tracking history in one file.

Reconnect, test and close out the move

At the destination, repeat the access check before the crew unloads. Keep the spa on its approved supports until it reaches the prepared pad, then refit panels, steps and covers without overtightening the shell. An electrician should make the final connections, verify the grounding and GFCI or RCD arrangement, and test the pump, heater, lights and controls. The manufacturer’s filling sequence must be followed; running a pump or heater with an air lock or an incorrect water level can damage the equipment.

Commissioning is more than switching on the jets. Check every plumbing joint for leaks, confirm that water chemistry is balanced for the local supply, and record the filter and water-level condition. Hot tubs in humid Brisbane, damp Melbourne, frosty Canberra or coastal Sydney can face different corrosion and condensation risks, so covers, vents and treated water should be maintained accordingly. Any electrical approval, plumber’s certificate and freight document belongs with the owner’s property records.

The final handover should include the drain-down record, labelled parts inventory, pre- and post-move photographs, delivery receipt and electrician’s sign-off. The concrete next step is a written, site-specific quote showing those items, the named hauling carrier, delivery dates and every access charge; that document becomes the control point for the relocation.

Our experienced Sales Team takes the time to listen in an effort to provide you a competitive moving package that best meets your needs and budget.
Universe Express Customer Care Coordinators and Relocation Specialists are knowledgeable, personable and attentive. They provide accurate and extensive information about what to expect during your move.
© 2006-2009 Universe Express Inc. All Rights Reserved.
US-DOT: 1601312 • ICC-MC: 592337 • NJ-PC: 00096600
International Movers